Fragrance Lamp Care & Cleaning

Care for your Ashleigh & Burwood Fragrance Lamp

The outside of your Ashleigh & Burwood Fragrance Lamp can be easily cleaned using a proprietary furniture or glass polish. Always ensure that the snuffer-cap is on the Lamp and that the top is cool before cleaning.

Cleaning the stone/wick assembly

Use this method if you have the following issues:

  • Your wick won't light
  • Your wick won't get hot
  • Your wick won't remain lit for 2-3 minutes
  • You're not receiving a good fragrance throw

If you're experiencing the above issues, your wick could be blocked.

  1. Take your stone/wick assembly out of your Lamp and put into a ceramic bowl/cup (be careful when doing this as your wick will be soaked with Lamp Fragrance), ensure the surface underneath is covered.
  2. Pour your Lamp Fragrance into your bowl/cup and fill until 2-3 cm full.
  3. Cover with cling film and put into a cool dark place. Leave for 24 hours.
  4. Place the wick back into your Lamp, bearing in mind the rope part of the wick will be soaked in Lamp Fragrance, so again be careful with any dripping.
  5. Replace the snuffer cap and leave for 10 minutes.
  6. After 10 minutes light the wick. Please use caution as initially the flame will be quite high (up to 3 inches).
  7. Use your Lamp again as normal!